Newsletter Shrink-wrapping
Product Description
Long Zebra burner Cat. No. 1094
Price excluding tax : 173,00€
In stock
With this new Zebra road marking burner cat. No. 1094 designed for the Hornet Thermo-marking gun, operators can work standing and cover wider surface areas than with short burners, while enjoying an exceptional 90 kW of power.
With its 50 cm length and nearly metre-long flame, large surface areas are no problem!
This thermo-marking burner is a component of the Hornet shrinkforming gun and will be an effective addition to your kit of accessories.
If, in the past, you have opted for the Hornet torch in its 30 or 70 kW version, you can purchase this new Express Shrink Wrapping product at your usual distributor and benefit from one of the best products of its generation!
Additional information
| Weight | 0,22 kg |
|---|---|
| Power (kW) : | 90 |
| Burner diameter (mm) : | 50 |
| Gas comsuption (Kg/h) : | 11,8 |
| Sound level (dBA) : | 81 |
| Longueur du produit seul (en cm) : | 50 |
| Largeur du produit seul (en cm) : | 8 |
| Hauteur du produit seul (en cm) : | 4 |
- 160 kW hornet burner
- Supplied on hanging carton
- Supplied on hanging carton
- Road marking on large surface areas
- Heat-shrink thick sheets
- Heat-shrink thick sheets
They also liked ...
Now available as a separate item, the 30 kW shrinkforming burner Cat. No. 1031 is designed exclusively for the Hornet shinkforming gun.
It delivers power of 30 kW and is suitable for detailed soldering work.
Price excluding tax : 93,50€In stock Add to cart
With this new heat shrink burner designed for the Hornet shrinkforming gun, users can work standing, for all road marking-type jobs, with 90 kW of controlled power at their fingertips.
Price excluding tax : 120,00€In stock Add to cart
With this new curved shrinkforming burner Cat. No. 1161 designed for Hornet shrinkforming guns, operators can work standing and cover larger surface areas than with a shorter burner, while enjoying 160 kW of power.
With its 50 cm length and one-metre flame, large surface areas are no problem.
Price excluding tax : 146,00€In stock Add to cart
Now available as a separate item, the 90 kW shrinkforming burner (Cat. No. 1091) is designed exclusively for the Hornet shrinkforming gun.
Delivering power of 90 kW, it is suited for use with thick films (220 µm to 320 µm) and is therefore perfect for containment, logistics and boating jobs.
Along with the Hornet case Cat. No. 10701, this product provides operators with a complete kit to effectively perform various jobs.
Price excluding tax : 95,50€In stock Add to cart
Related Products
10 m rubber hose ISO 3821 internal diameter 6.3 mm, crimped 3/8" left-hand thread female connection on both ends.
Price excluding tax : 54,00€In stock Add to cart
Pair of gloves Cat. No. 42721 with thermal insulation, 5 fingers, anti-heat upper layer, wide webbed thumb, fleece hand lining, double-lined canvas sleeve, palm extended by a 140 mm sleeve, single-piece back. Reinforced stitching.
Price excluding tax : 16,95€In stock Add to cart
Now available as a separate item, the 30 kW shrinkforming burner Cat. No. 1031 is designed exclusively for the Hornet shinkforming gun.
It delivers power of 30 kW and is suitable for detailed soldering work.
Price excluding tax : 93,50€In stock Add to cart
